Zenit Powertools ZD-1100 M, Инструкция по эксплуатации

Страница: 5 / 8

5
standard accessories
Wrench 1 pc.
Side handle 1 pc.
Depth gauge 1 pc.
Standard accessories are subject to hange
without notice.
applications
Rotation and hammering function:
- drilling holes in concrete, marble,
granite, tile and other materials.
Rotation only function:
- drilling holes in metal, wood and
plastic.
prior to operation
1. Power source.
Ensure that the power source to
be utilized conforms to the power
requirements specified on the product
nameplate.
2. «On\Off» switch.
Ensure that the power switch is in the
OFF position. If
the plug is connected to a receptacle
while the power switch is in the ON
position, the power tool will start
operating immediately, inviting serious
accident.
3. Extension cord.
When the work area is removed from the
power source. Use an extension cord of
sufficient thickness and rated capacity.
The extension cord should be kept as
short as practicable.
4. Replacing the bit.
Insert the bit into the chuck and fix it
with the wrench or turn the upper part of
the keyless chuck.
5. Selecting the appropriate drill bit.
When boring concrete or stone use a
concrete drill bit.
When boring metal or plastic use an
ordinary metalworking drill bit.
When boring wood use an ordinary
woodworking drill bit.
6. Switching the rotation speed.
Before switching the rotation speed
ensure that the trigger switch is in the
«Off» position and the bit doesn’t move.
To switch the rotation speed press the
trigger switch and turn the speed control
dial.
7. Impact to rotation changeover.
Shift the change lever between the
right and left positions to switch easily
between IMPACT (rotation and impact)
and ROTATION (rotation only),
respectively.
To bore holes in hard materials such as
concrete, stone and tiles, shift the change
lever to the right-hand position (as
indicated by the hammer mark). To bore
holes in metal, wood and plastic, shift the
change lever to the left-hand position (as
indicated by the bit mark).
WARNING! Do not use the Impact
Drill in the IMPACT function if the
material can be bored by rotation only.
Such action will not only reduce drill
efficiency, but may also damage the drill
tip. Operating the Impact Drill with the
change lever in mid-position may result
in damage. When switching, make sure
that you shift the change lever to the
correct position.
8. Fixing the side handle.
Attach the side handle to the mounting
part. Rotate the side handle grip in a
clockwise direction to secure it.
Set the side handle to a position that is