Zenit Powertools ZD-1100 M, Инструкция по эксплуатации

Страница: 4 / 8

4
18. Use outdoor extension leads. When
tool is used outdoors, use only extension
cords intended for outdoor use.
19. Stay alert. Watch what you are doing.
Use common sense. Do not operate tool
when you are tired.
20. Check damaged parts. Before further
use of the tool, a guard or other part that
is damaged should be carefully checked
to determine that it will operate properly
and perform its intended function.
Check for alignment of moving parts,
free running of moving parts, breakage
of parts, mounting and any other
conditions that may affect its operation.
A guard or other part that is damaged
should be properly repaired or replaced
by an authorized service center unless
otherwise indicated in this instruction
manual. Have defective switches replaced
by an authorized service center. Do not
use the tool if the switch does not turn it
on and off.
21. Warning Use only accessories
or attachments recommended in this
instruction manual or in the catalogue of
ZENIT ТМ.
Have your tool repaired by a qualified
person. This electric tool is in accordance
with the relevant safety requirements.
Repairs should only be carried out by
qualified persons using original ZENIT
TM spare parts. Otherwise this may result
in considerable danger to the user.
safety precautions on usinG
impact drill
1. Before drilling into walls, ceilings or
floors, ensure that there are no concealed
power cables inside.
2. Always keep the tool handle and the
side handle firmly. Otherwise the counter
force may lead to inaccurate or even
dangerous operation.
3. Never touch the tool bit with bare
hands after operation.
description
1. Socket;
2. Front handle with position clamp;
3. Depth gauge;
4. Clamp of the depth gauge;
5. Mode switch;
6. «On/Off» switch;
7. Controller of the revs;
8. Reverse switch;
9. Lock button.
technical specifications
Model ZD-1100 M
Rated power 1100 W
Rated voltage 220-240 V
Rated frequency 50-60 Hz
Chuck size 13 mm
Drill diameter: ----
in wood 2-25 mm
in steel 2-13 mm
in concrete 2-16 mm
Spindle speed 0-2800 rpm
Gross/net weight 2.4 / 2.3 kg