Zenit Powertools MMA-200/2, Инструкция по эксплуатации

Страница: 8 / 10

8
• Check voltage of the power line.
Machine will not work if the voltage is
too low or too high. Machine will start
automatically only if voltage returns back
to normal level.
• Ensure that there is no short circuit on
the output of the machine. Otherwise
eliminate the defect.
• All connections of the welding circuit
must be operational, and functional
terminal must be securely fixed to the
work piece to be welded.
CAUTION
When using the drill follow these rules:
• do not allow mechanic damage (bumps,
falls etc.);
• protect the tool from external sources of
heat and chemically active substances, as
well as liquid and objects penetration;
• provide effective cooling and wastes
withdrawal from the tool working zone;
• before disconnecting the tool from the
power source turn off the On/Off switch;
WARNING! Repair, modification
and check of ZENIT power tools should
be performed only in authorized service
centers ZENIT. While use or maintenance
of power tools follow all safety rules and
standards.
NOTE
Zenit Power Tools are constantly being
improved and modified to incorporate the
latest technological advancements.
Accordingly, some parts may be changed
without prior notice.