ZENER VARIDRIVE SOLUTIONS
ZENER ECODRIVE® 8000
IM00130
P a g e
| 26
20/07/2018 3:59 PM
Pressure Solar AC
set up (default)
Irradiance scale
1562.5W/m^2
CHECK / SETUP OF IRRADIANCE SENSOR
The irradiance sensor is used to return to SOLAR operation when it has been switched over to the Auxiliary AC power supply. It
can also be used to switch from Solar to an AC power supply. If an irradiance sensor is installed it must be checked otherwise the
system will not operate correctly.
Checking Irradiation Sensor Feedback
This should display about 1000w/m2 on a sunny day with panels facing the sun. If incorrect check wiring. If the irradiance sensor
was not supplied by ZENER check the settings & scaling.
To modify the irradiance Scale
1.
Press
from any of the active displays to show:
2. Press
to access the application parameter menus.
3. Press
to scroll down to:
.
4. Press
to edit, then increase or decrease the value using:
5. Press
to save & exit.
ESC
Содержание ECODRIVE 8000
Страница 29: ...ZENER VARIDRIVE SOLUTIONS ZENER ECODRIVE 8000 IM00130 P a g e 27 20 07 2018 3 59 PM Intentionally Blank...
Страница 31: ...ZENER VARIDRIVE SOLUTIONS ZENER ECODRIVE 8000 IM00130 P a g e 29 20 07 2018 3 59 PM Intentionally Blank...
Страница 37: ...ZENER VARIDRIVE SOLUTIONS ZENER ECODRIVE 8000 IM00130 P a g e 35 20 07 2018 3 59 PM Intentionally Blank...
