ZENEC Z-E3726, Руководство по установке

Страница: 4 / 6

4
5.a
4
5.b
5.a Insert the mounting frame (No. 2) at an angle
from above into the radio slot.
6. (No picture)
Fit the GPS antenna (No. 6) at a suitable place,
and make sure that the GPS reception is not
adversely affected due to shadowing by metallic
vehicle parts (thermal glazing etc.). Use the
metal plate supplied as a base for the GPS
antenna to improve its reception, depending on
the situation. Next run the connecting cable to
the radio slot.
7. (No picture)
If you wish to use it, now fit the external
Bluetooth microphone (No. 7) supplied, and run
the connecting cable to the radio slot.
Depending on preference and on choice of an
external or device-internal microphone, the
microphone source for the Bluetooth mode
must be correspondingly changed in the device
menu.
8. (No picture)
Run the USB extension cable (No. 10) from the
radio slot to the position you want.
4. Before installing the ZENEC system (No. 1)
remove the two transport securing screws.
5.b Screw down the mounting frame at the top and
bottom with the four Phillips screws (No. 3)
supplied with the ZENEC system kit.