32
33
Z-E2015
BASIC BLUETOOTH HANDS-FREE OPERATION
Bluetooth main menu:
Onscreen keypad
Favorites
Call Log
Contacts
Bluetooth settings and device list
Control elements:
Tap to open Bluetooth settings
Tap to open device list
De- or activate auto connect function
Choose between different pairing
mode
Microphone selection
Adjust microphone gain
Sorting phonebook entries by fi rst or
last name
Control elements:
Bluetooth settings and device list:
BASIC BLUETOOTH HANDS-FREE OPERATION
NOTE:
■
Auto Connect:
It’s possible to deactivate the function temporally, but defaults back to
activated after the next system start.
Mobile phones, which are registered in the ZENEC device list, will be
connected after a system start or a short disconnection automatically.
The sequence of the mobile phones ensued by priority. Usually the
ZENEC device searches for the last connected mobile phone.
Mobile phones, which were disconnected with the ZENEC device, won’t
be connected automatically again.
In some cases, you have to manually connect a mobile phone, if it was
rarely used or the search failed often.
■
Pairing Mode:
SMART:
Do not enter a long PIN to connected your mobile phone, if your phone
supports this mode.
There will be a password, displayed on the screen of the ZENEC device
and the mobile phone. If they are identical, please tap to confirm.
If your mobile phone doesn’t support this mode, the ZENEC device will
use the PIN mode automatically.
PIN:
The ZENEC device sends a request to your mobile phone.
The ZENEC device is listed as “ZENEC C9PLUS“ and requires you to
enter the PIN. Please enter 1234 and confirm your input.
