Zenair STOL CH 701, Руководство по эксплуатации самолета

Страница: 11 / 29

4. Normal procedures
Section 4 provides
checklist and amplified procedures for the conduct of normal
operation.
Obtain adequate professional flight training on the STOL CH 701 and the required pilot
licence before attempting operation of the aircraft.
Pre-flight inspection:
(“walk around” before each flight):
1. Ignition switch off, fuel open, controls free.
2. Drain gascolator and all drain valves to ensure that no water is in the fuel lines check
cowl fasteners for looseness, check spinner and prop. You may want to remove the cowl
to check the exhaust and general engine condition for safety. Check fuel quantity as well
as coolant level and water pump.
3. Make a visual check of the front wing attachment points, pitot static, upper forward
strut attachment (remove tie down), condition of slats and wing tip. Folding wings
(option) confirm that the push-pull tubes’ quick release connections are secure.
4. Flaperon, check general condition, hinges, rear strut attachment, flaperon control and rear
wing attachment points
5. Landing gear condition, attachments, tires
6. Stabilator attachments, elevator and rudded hinges, cables and attachments, controls
stops (remove rear tie down).
Continue walk around in reverse order.
2
4
Before starting engine:
Operate controls and make a
rapid visual check for proper operation. Make sure
windshield is clean for maximum visibility. Check brakes, and fasten and check safety belt.