by one degree. If pressed for three seconds, the temperature setting
will decrease quickly. When the internal temperature of the sauna
reaches the setting temperature, the “Heat” indicator lamp will turn
off and the heating function will stop. When temperature displays 2°C
lower than selected setting temperature, the “Heat” indicator lamp will
turn on and the heaters will start to heat again.
The temperature can be displayed in either Centigrade and Fahrenheit.
Press the temperature button ”+” and “-” then press “Light” to confirm
switch.
d. Time setting
Press time “+” and “-” to adjust time. Adjustment range is 5-60 minutes.
Each time “+” button is pressed, time will increase by one minute. If
pressed for three seconds, the time setting will increase quickly. Each
time the “-” button is pressed, time will decrease by one minute. If
pressed for three seconds, the time setting will decrease quickly. When
the display reads “05”, the timer will beep and the sauna will shut off
automatically after 5 minutes. To extend the sauna session, reset the
timer again. When working time reaches the setting time, the indicator
lamp will turn off and the heater will stop heating. At this time, the
sauna will beep twice to indicate the sauna session is over.
e. AUX/FM Function
When the sauna power is on, press the “FM/AUX” button to switch
between AUX and FM function. When music or radio playing, press
the Time/Vol “+” and “-” button to adjust volume. When FM has been
selected, press the Temp/FM “+” and “-” button to select different
frequencies. Under AUX state, press the “FM/AUX” button to stop music.
Cleaning And Maintenance
Cleaning
Do not use liquid or aerosol cleansers inside the sauna. Unplug the
sauna room from the wall outlet before cleaning. Use plain water and
a soft cloth for cleaning. Do no use benzene, alcohol or strong cleaning
chemicals on sauna.
NOTE:
Use of chemicals will damage the wood and any natural protection
layer inherent in the wood.
Transportation and storage
1. Avoid exposure to rain, snow or strong collisions during transport.
2. Do not store in damp environments.
9
