98
To remove and clean the filter combination, turn it
counter clockwise and take it out by lifting upwards
1
.
Pull and remove the metal/plastic filter
2
. Then pull
the coarse filter out of the micro filter
2
. Rinse it with
lots of water under the tap. Refit the metal/plastic filter.
Insert the coarse filter into the micro filter in a way
that the marks will correspond to one another. Attach
micro filter into the metal/plastic filter and turn to the
direction of arrow and it is locked when the arrow on
micro filter can be seen from across
3
.
Never use your dishwasher without any filter.
●
Incorrect fitting of the filter will reduce the washing
●
effectiveness.
Clean filters are very important in terms of the
●
proper running of the machine.
Keep the program selection button pressed for
3 seconds. End of program indicator flashes
and “1” is indicated on the program display.
Open the door and select a new program by
pressing the program selection button.
Open the door of your machine. The last
selected program will appear on the screen.
Discharge process starts after closing the door of the machine.The
machine discharges the water in it for about 30 seconds.When the
program is cancelled,your machine gives a buzzer sound for “5 times“
and the “end of program indicator” turns on.
After closing the door, the new program started will
resume the course of the old program.
Changing a programme
If you would like to change programs while a washing program is continuing.
NOTE: When the door of the machine is opened in order to stop the washing program
before it is completed first open the door slightly in order to avoid water spillage.
Changing a programme with resetting
If you would like to cancel a program while a washing program is resumed.
NOTE: When the door of the machine is opened in order to stop the washing program
before it is completed first open the door slightly in order to avoid water spillage.
Switching the machine off
When end of program indicator turns on, switch
your machine off by using the Power On/Off
button.
Pull the plug out of the outlet. Turn off the
water tap.
NOTE: After the buzzer sound which indicates the end of the program when the
washing program comes to an end (end indicator light is on), you can leave the
door of your machine ajar in order to hasten the drying.
NOTE: If the machine door opens during washing or the power is cut off, the
machine will go on to the program in case the door is shut or the power is back.
Maintenance and cleaning
Cleaning the machine in regular intervals prolongs the machine’s
service life.
Oil and lime may accumulate in the machine’s washing section. In case of such
accumulation:
Fill the detergent compartment without loading any dishes into the
machine, select a programme that runs at high temperature, and start the machine. In
case of insufficiency, use special cleansing material available in the market. (Cleansing
material produced special to machines by detergent producers.).
Cleaning the seals in the machine door
To clean any accumulated residues in the door seals, wipe the seals regularly by using
a dampened cloth.
Cleaning the machine
Clean the filters and spray arms at least once a month.
Unplug your machine and turn off its tap before starting the cleaning.
Do not use hard materials when cleaning your machine. Wipe with a fine cleaning material
and a dampened cloth.
Filters
Check if any food wastes have remained on the
coarse and fine filters.
If any food wastes are left, remove the filters and
clean them thoroughly under the water tap.
a
Micro Filter
b
Coarse Filter
c
Metal/Plastic Filter