Zelmer ZVC225SK, Руководство пользователя

Страница: 36 / 40

42
ZVC225-001_v03
Technical parameters
The type of the vacuum cleaner and the technical parameters
are indicated on the rating label. Mains protection 16 A. Does
not cause interferences with audio/video devices.
Does not require grounding
.
ZELMER vacuum cleaners meet the requirements of the
applicable norms.
The appliance is in conformity with the requirements of the
directives:
–
Electrical equipment designed for use within specific
voltage limits (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
The device meets the requirements of Commission
Regulation (EU) No. 666/2013 on implementing the Directive
of the European Parliament and of the Council 2009/125/EC
with regard to eco­design requirements for vacuum cleaners.
The device complies with the requirements of the
Commission Delegated Regulation (EU) No. 665/2013
supplementing Directive of the European Parliament and of
the Council 2010/30/EU with regard to energy labelling of
vacuum cleaners.
Noise level: 78 dB(A).
The appliance was marked by a CE sign on the rating label.
Static electricity
In the process of vacuuming of some surfaces in areas of
low air humidity the device may become electrically charged.
It is a natural phenomenon – it does not damage the device,
and it is not considered to be a fault.
In order to minimize the phenomenon, we recommend you to:
●
discharge the device by touching metal items in the room
with the pipe,
●
increase air humidity in the room,
●
use widely available antistatic agents.
Design
A
1 Fastening for nozzle brush
2 Plug with the cord
3 Cord winder button
4 On/off button and suction power control knob in one
5 Full bag indicator
6 Fastening of the upper cover
7 Handle
8 Bolt – a mechanic controller of suction power
9 Suction hose
10 Telescopic suction pipe
11 Intake filter (EPA E11)
12 Foam rubber cover
13 SAFBAG­type bag (1 item)
14 Switchable combination brush
15 Small nozzle
16 Crevice nozzle
17 Small brush
18 Parquet brush “BNB”
Is used to clean and polish hard, scratch sensitive
surfaces such as wooden floors, floor panels, parquet,
marble, tiles, etc.
Delicate and soft natural bristles ensure maximum
vacuum effectiveness and protects against scratching
the cleaned surface.
Before first use
B
Before starting the vacuum cleaner make sure, whether the
SAFBAG is properly installed in the chamber of the vacuum
cleaner, and whether all filters are in place as well.
1 Place the end of the hose in the opening of the vacuum
cleaner, and gently press it. A characteristic “click” signalizes
the hose has been properly installed.
2 Connect the other end of the hose (handle) with the
telescopic suction tube. In order to do so press the locking
TYPES OF ZVC225 VACUUM CLEANERS
Design and
accessory
options:
Type
Suction power control
Full bag indicator
No bag safety feature
Bag/number
Intake filter
Suction pipe
Switchable combination
brush
Parquet brush “BNB”
Small nozzle
Crevice nozzle
Small brush
1 2 3 4 5 6 7 8 9 10 11 12
ZVC225SP + + + SAFBAG 1 piece EPA E11
Telescopic with
a blocking mechanism
+ + + + +
ZVC225SK
+ + +
SAFBAG 1 piece EPA E11
Telescopic with
a blocking mechanism
+ – + + +