Zelmer ZSVC622 TYMEK, Руководство пользователя

Страница: 14 / 64

14
PL EN
CARE AND MAINTENANCE
Filter replacement and cleaning
1. Turn off the Cordless vacuum cleaner
2. Press and hold the dust cup release button and rotate the dust cup at a clockwise angle of 30 °, then
remove the whole dust cup. (Rys.6; *-dust cup release button)
3. How to clean the dust cup：
Without removing the dust cup：Press the dust cup release button directly, Then drop the dust into waste
container.(Rys.7; fig. A)
Or you can remove the dust cup and Press the dust cup release button directly, Then drop the dust into
waste container.(Rys.7; fig. B)
4.Remove filter assembly: Filter, Hepa , Dust cup (Rys.8)
5.Cleaning the filter/hepa in water, wait for it to dry completely (Rys.9).
6.Put the filter/hepa back into the dust cup carefully (Rys.10). (
7.Put the dust cup back into the main body: Dust cup counterclockwise rotation into the slot, hear the sound
of “ka”, that means the dust cup installed in place (Rys.11).
Rotating brush cleaning
1. Turn the brush bottom screw to unlock position (Rys.12)
2. Open the brush bottom fixed device.
3. Show brush, clean the rotating brush on the twisting thing.
4. Put the rotating brush back.
5. Turn the brush bottom screw to lock position
TROUBLE SHOOTING GUIDE
PROBLEM POSSIBLE REASON POSSIBLE SOLUTION
HAND VACUUM WILL NOT
OPERATE 1. no power in electrical outlet
supplying transformer
2. unit needs servicing
1. check fuse or breaker.
Replace fuse/reset breaker.
HAND VACUUM WILL NOT
PICK-UP OR SUCTION
POWER IS WEAK 1.Dust cup is full.
2.Dust cup filter needs clea-
ning.
1.Empty dust cup.
Remove dust cup filter and
check for object(s) in air duct
and remove.
DUST ESCAPING FROM
HAND VACUUM 1.Dust cup is full.
2.Dust cup filter is not insta-
lled correctly.
3. Puncture/hole in dust cup
filter.
1.Empty dust cup .
2. Review dust cup filter
instruction.
3. Replace dust cup filter.
HAND VACUUM BRUSHES
WILL NOT PICK-UP 1.Dust cup is full. 1.Empty and clean dust cup
container.