Zelmer ZSVC622 TYMEK, Руководство пользователя

Страница: 13 / 64

13
PL EN
INSTRUCTION OF USE
Note:
Before using the Cordless Vacuum cleaner for the first time, clean it with a soft, damp cloth and dry thor-
oughly.
Do not immerse the Cordless Vacuum cleaner in water or any other liquid.
1. Remove the vacuum cleaner from the carton, remove all stickers, shipping blocks, bags, and fillers.
2.
Inspect the vacuum cleaner for any damage that may have occurred in transit. Contact your
dealer if you suspect damage.
3. Assemble the vacuum cleaner properly (see section: “Assembling the Vacuum Cleaner”).
4. Charge the battery (see section “CHARGING THE BATTERY”).
5. Make sure that your mains supply corresponds with the data on the charger’s name plate.
Assembling the Cordless Vacuum cleaner
1. Assembling the aluminum tube (Rys.1)
Fit the tube into the main body’s air inlet until it clicks into position.
If need to remove the tube, hold the main body, press the release knob and remove the tube
2. Assembling the electrical floor brush (Rys.2)
Fit the electrical floor brush onto the tube until it click into the position.
If need to remove the electrical floor brush, hold the aluminum tube, press the floor brush release knob and
remove the brush from the tube.
3. Assembling the 2 in 1 brush (Rys.3)
Fit the accessory on the main body’s air inlet and/or on the tube until it clicks into position.
The 2 in 1 brush is good for cleaning stairs, corners.
Operating the Cordless Vacuum cleaner
Before first time use, ensure the vacuum cleaner has been charged 4-4.5hours.
Turn on the Cordless vacuum cleaner by pressing the ON/OFF button.
Press the “Power” button sequentially to obtain a change in the vacuum cleaner speed.
The appropriate vacuum cleaner speed will be indicated by the corresponding “MIN” or “MAX” indicator light
Note: Battery indicator light represents battery capacity and will illuminate during use. The indicator light will
turn off one by one as the battery runs out.
To turn off the vacuum cleaner press the “ON/OFF” button again
Warning: Do not use the Cordless Vacuum without the removable filter or dust bin in position.
Charging product (Rys.4; *-charge port)
1.Turn off the Cordless vacuum cleaner.
2.Connect the adapter to the charge port on the main unit.
3.Plug the adapter into the main power supply.
The battery indicator display light (Rys.5; *-battery indicator lights) will flash in a ring. Once the battery is
fully charged, the battery indicator lights indicated by the battery are always bright in a ring.
Warning: Do not use any main power adaptor other than that supplied, as using an alternative will increase
the risk of injury and/or damage to main product.