Zelmer ZHD13000, Руководство пользователя

Страница: 36 / 40

36
HD1400-001_v05
AIR CONCENTRATOR
Air concentrator allows to direct air stream precisely at the
desired place, thanks to which you will in an easy and fast
way dry particular parts of hair. Air concentrator is easily
affixed to the front part of hair dryer.
DIFFUSER
Diffuser allows to dry your hair easily and set a natural
looking hairstyle. Thanks to application of diffuser you will
obtain natural waves (without necessity of applying gel or
styling mousse) and the hair style will last for a longer time.
Hair drying and styling
●
After washing your hair dry it thoroughly with a towel.
●
Affix desired accessory to hair dryer, air concentrator to
dry hair or diffuser to style it.
●
Before plugging in the appliance, make sure that the
airflow and temperature adjustment switch is set to "0".
Then plug in the appliance.
●
If you want to quickly dry your hair set the airflow and
temperature adjustment switch to "3".
●
When hair dryer is switched on the ionisation function
thanks to which you will easier set your dream hair style
and your hair will remain healthier.
●
In order to fix the hairstyle press and hold the switch of
cold blow
.
●
When your hair is dry, set the airflow and temperature
adjustment switch (4) to "0".
●
Always unplug the appliance from the electrical autlet
after each use.
●
Immediately after the use accessories can be hot.
Always leave the appliance to cool down before removal
of accessories.
Cleaning and maintenance of hair dryer
●
After each use, always turn off the appliance and unplug
the power cord from the electrical outlet.
●
Never put hair dryer, power supply cord or plug in water
or any other liquid.
●
It is recommended to remove the air inlet cover (2) from
time to time in order to clean it and to clean the air inlet
(3) , located under the cover.
●
When required clean hair dryer casing with a dump cloth
(it can be moistened with some washing-up liquid) dry it
out or wipe it till dry.
●
Do not use scrubbing agents or solvents.
●
Carefully dry all the parts which have been cleaned.
CLEANING AIR INLET COVER AND NETLIKE
FILTER
1
Remove the air inlet (2) by turning it counter-clockwise to
the position .
●
Clean the air inlet and wipe it with a dry or slightly damp
cloth. After drying place it in the previous place.
2 Replace the air inlet cover (2) that three latches located
on the air inlet cover hit the holes on the body of the dryer.
B
The manufacturer does not accept any liability for any damages
resulting from unintended use or improper handling.
The manufacturer reserves his rights to modify the product any time
in order to adjust it to law regulations, norms, directives, or due to
construction, trade, aesthetic or other reasons, without notifying in
advance.
3 Turn the air inlet cover (2) clockwise to the position .
STORAGE
●
If your hair dryer is not in use, always unplug the power
cord from the electrical outlet.
●
After use wait till the hair dryer cools down and place it in
a dry, cold and unavailable to children place.
●
Never turn the cord around hair dryer as it causes the
risk of premature wear risk of cord damage. In order to
ensure its long lasting operation the cord is to handled
with care, avoiding tugging, twisting or pulling, especially
when unplugging. If the cord gets twisted during
operation it should be straightened from time to time.
Ecology – Taking care of the environment!
Each user can contribute to protection of environment. It is
neither difficult nor too expensive. To do it:
Cartoon packaging is to be disposed of
as waste paper. Polyethylene (PE) foil
packaging is to be placed in a container for
plastic. Used appliance is to be returned to
a proper collection point, as dangerous parts
of the appliance can cause environmental
hazard.
Do not dispose the appliance with the municipal waste!