Zelmer cp2100, Руководство пользователя

Страница: 26 / 28

30
CP2100-002_v03
3 Place the fruit with the pulp facing the juicing component
(4) and press it until the juicer starts the juicing process.
Exercise care while pressing the fruit onto
the cone (rotating strainer and cone) and pay
special attention to fingers.
After finishing the juicing operation
1 Take out the power cord plug from the mains socket.
2
Set the spout (e) in the closed position; this will prevent
the juice from dripping on the surface outside the glass.
3 Take out the glass with the juice.
●
Start to disassemble the juicer (see section “Preparing
the juicer for operation” ).
4 Put together the cleaned and dried juicing cones (4) and
place them in the storage compartment (b) .
Cleaning and maintenance
●
Clean the juicer thoroughly after each use in order to
prevent the juice residue from drying up.
●
Clean the power base with a wet cloth sprinkled with
washing-up liquid.
In case of water or juice getting inside the
power base, unplug the juicer and have it
checked at the service centre.
●
Wash the juicer accessories, such as bowl, strainer and
juicing component, in warm water with an addition of
washing-up liquid.
●
After washing them up, dry all the parts thoroughly.
●
Assemble the juicer (see the section „Preparing the
juicer for operation” ).
What to do when …
The juicer does not work:
1. Check to make sure that the juicer is connected to the
electric outlet.
2. Check to make sure that the juicer is properly assembled
as described in this user manual.
3. Have the juicer checked at the service centre.
Ecology – environment protection
Each user can protect the natural environment.
It is neither difficult nor expensive.
In order to do it: put the cardboard packing into
recycling paper container; put the polyethylene
(PE) bags into container for plastic.
When worn out, dispose the appliance to
particular disposal centre, because of the dangerous
elements of this appliance, which can be hazardous for
natural environment.
Do not dispose the appliance with the municipal waste!
E
The manufacturer does not accept any liability for any damages
resulting from unintended use or improper handling.
The manufacturer reserves his rights to modify the product any time
in order to adjust it to law regulations, norms, directives, or due to
construction, trade, aesthetic or other reasons, without notifying in
advance.