Zelmer CK2320, Руководство пользователя

Страница: 50 / 54

54
CK2320-001_v01
5 Plug in the power cord plug (17) to a grounded electricity
supply outlet. You will hear a short beep and the water level
indicator will illuminate as the appliance will be turned on.
The water indicator light will turn off
automatically after 40 seconds.
Operating the appliance
BOILING AND MAINTAINING WATER
TEMPERATURE (Fig. E)
1 After plugging in, the appliance will automatically go to
the boiling mode. The (19) (RE-BOIL) LED indicator will
light and the temperature LED indicator (24) will flash for the
value 85°C.
2 Once water comes to a boil, the appliance will go
to the keep warm mode (accompanied by three sound
alarms) and the temperature LED indicator (24) will light for
temperature 85°C.
3
Using the button ( ) (23) it is possible to keep the
water at the following temperatures: 98°C, 85°C or 65°C.
It is also possible to turn off the keep-warm function and go
to the cooling mode ( ).
In the keep-warm mode, when water temperature falls
●
below the fixed value in grades, the appliance will
automatically switch to the keep-warm mode and once
it reaches the appropriate temperature it will return to the
keep-warm mode.
In the cooling mode, the heater is off and water is cooled
●
automatically to the ambient temperature.
Functions available in the boiling mode: (
●
, DISPENSE ,
/ ).
Functions available in the keep-warm mode: (
●
,
DISPENSE , / , DECHLORINATE/RE-BOIL ).
Water temperature will not change instantly
after pressing the button. The heating and
cooling process takes some time, depending
on the amount of water in the appliance.
4
In order to turn on the re-boiling mode, press the (18)
DECHLORINATE/RE-BOIL button once. The appliance will
start boiling the water.
In the re-boil mode, the
●
RE-BOIL LED indicator (19) will
light and the temperature LED indicator (24) will flash for
the previously selected temperature.
5 To turn on boiling with dechlorination (in the boil and
re-boil mode), press the DECHLORINATE/RE-BOIL button
(18) twice. The dechlorinate mode will be turned on.
The
●
RE-BOIL LED indicator (19) and the temperature
LED indicator (24) for the previously selected temperature
will both flash.
After the dechlorination process completes, you will hear
●
a sound alarm three times, and the RE-BOIL LED indicator
(19) will go out and the temperature LED indicator (24) for
the previously selected temperature will light steadily.
Boiling takes longer with the dechlorination
function and the appliance generates more
steam (be careful not to be scalded).
If there is no sufficient amount of water in the
appliance, the temperature LED indicators (24)
for 98°C and 65°C will flash together. In such
case, add more water to avoid overheating the
inside of the appliance.
Regularly check if the water level is above
the MIN level on the water level indicator (9).
Otherwise, frequent activation of the anti-
overheat protection may cause discolouration
of the inside of the appliance, smell, blown
fuses, and even a fire.
POURING WATER AFTER BOILING (Fig. F)
1
Press the lock button (21) / , to unlock the
appliance. The lock light (22) will come on.
After turning on, the appliance is automatically locked
●
and the lock light (22) is on.
If within 10 seconds after pressing the lock button
●
(21)
( / ), the DISPENSE button (20) is not pressed or
if no cup or other vessel is placed under the dispensing
spout, the appliance will be locked again and the lock
light (22) will come off.
2 Pour water by pressing the DISPENSE button (20) or by
placing a vessel under the spout (11) so that it will touch the
dispensing unit with its rim.
After using the appliance (Fig. G)
1 Unplug the appliance.
2
Disconnect the power cord from the appliance plug-in
socket (13) .
Allow the appliance to cool and remove the lid
●
(3)
in accordance with the description given in the previous
sections.
3 Pour out all the water through the spout (7) .
Make sure that there is no water in the appliance.
●
Replacing the sealing ring (Fig. H)
If the sealing ring (5) breaks or loses its elasticity, steam may
come out from under the lid (3) . In such case, replace the
sealing ring (5) with a new one as follows:
Remove the lid as shown in
●
Fig. C .
1 Unscrew the 4 fixing screws.
2 Take out the inner lid (4) .
3 Replace the sealing ring (5) .