6
HDVI5 Component Video Switch
HDVI5 Component Video Switch
Instructions (Cont'd)
Auxiliary Relay Connections
The auxiliar y relay contacts are rated for 30volts @ 5amps,
A.C. or D.C., and can be used to switch on and off anything
you can think of within those limits.
Each relay has a Normally Open connection, two Common
connections, and a Normally Closed connection.
The diagram to the left demonstrates the internal connec-
tions to the relays.
By using the supplied adapter, the relays connections can
be made before rack mounting the HDVI5.
Auxiliary Relay Operation
The A and A2 buttons are used to toggle on and off the
relays.
The relays can also be setup to turn off after a given
amount of time. Or to turn on whenever specified channels
are selected. See the section
"Auxiliar y Relay Options"
for
relay setup information.
Using the supplied Remote Control
Use the section of the remote controlled labeled: HDVI5/
HDMI5 for controlling the HDVI5. ( The other sections are
used to control other Zektor products).
Each button on the remote functions the same as the front
panel switch with the same name.
•
•
•
•
•
•
•
•
1 2 3 4 5 SEL A1 A2
1
5
2
3
4
1
2
3
1
2
3
1
2
3
S1
S2
S3
A1
A2
SYN
SEL
4
HDVI5/HDMI5
MAS7
CVS4
SAS6x2
Using the supplied Remote Control
Use the remote controller buttons in the section
labeled: HDVI5 / HDMI5. (The other sections control
other Zektor products)
Each button on the remote corresponds to the
same button on the HDVI5's front panel.
Auxiliary Relay Connections
1 2 3 4 5 SEL A1 A2
Auxiliary Relay Operation: Use A1 and A2 buttons to toggle relays.
N/O COM COM N/C N/O COM COM N/C
Relay 1’
s
Contacts
Relay 2’
s
Contacts
N/O = Normally Open Contacts. These contacts
are open when the relay's LED is not lit.
COM = Common
N/C = Normally Closed Contacts. These contacts
are closed when the relay's LED is not lit.
Make connections to the adapter which plugs into the HDVI5.
