Blowing pull line into cable conduits (ø 25-200 mm)
Operating Manual EZ300 Version 05/2019
page 4 / 30
1.
Guide to Using the Operating Instructions
Pictograms
All the pictograms attached to the machine are shown and explained in the operating instructions.
Symbols in text
Warning where there is a risk of an accident or personal injury or serious damage to property.
Caution where there is a risk of damaging the machine or its individual components.
Engineering improvement
ZEITLER’s philosophy is to continually improve all of their products. For this reason, we may modify the design,
engineering and appearance of our products periodically.
Therefore, some changes, modifications and improvements may not be covered in the operating instructions.
2.
Safety Precautions and Working Techniques
Special safety precautions must be observed when working with a power tool.
It is important you read and understand the operating instructions before using your machine for the first
time. Always keep the Operating Instructions with the EZ300 for future reference. Non-observance of
the safety precautions may result in serious or even fatal injury.
Observe all application such as local safety regulations, standards and ordinances for ex. Gouvernement, Insu
rances, Associations etc.
If you have not used this type of power tool before: Have your dealer or other experienced user show you how to
operate your power tool properly.
Minors should never be allowed to use a electrical machine except for minors of more than 16 years and trained
under supervision for their apprentice.
Bystanders, especially children, and animals should not be allowed in the area where a power tool is in use.
When the machine is not in use, shut it off and place it so that it does not endanger others. Secure it against
unauthorized use.
The power tool user is responsible for avoiding injury to third parties or damage to their property.
Do not lend or rent your machine without the operating instructions. Be sure that anyone using the EZ300
understands the information contained in the operating instructions.
In some countries the operation of noise emitting power tools is restricted by local regulations. Observe country
specific requirements and regulations.
Accessories and Spare Parts
Only use genuine replacement parts and accessories that are explicitly approved for the EZ300 by ZEITLER AG.
These parts are specifically designed to match your machine model and meet your performance requirements
and also to avoid the risk of accidents and damage to the machine. If you have any question in this respect,
consult an authorized servicing dealer.
Never attempt to modify your power tool in any way since this will increase the risk of personal injury.
ZEITLER AG excludes all liability for personal injury and damage to property caused while using unauthorized
attachments.
Physical Condition
To operate the power tool you must be rested, in good physical condition and mental health. If you have any
condition that might be aggravated by strenuous work, check with your doctor before operating a power tool.
Persons with pacemakers only: The ignition system of your power tool produces an electromagnetic field of a very
low intensity. This field may interfere with some pacemakers. To reduce health risks, ZEITLER AG recommends
that persons with pacemakers consult their physician and the pacemaker manufacturer before operating this tool.
Содержание EZ.300
Страница 1: ...PULL LINE BLOWER OPERATING INSTRUCTIONS...