
Blowing pull line into cable conduits (ø 25-200 mm)
Operating Manual EZ300 Version 05/2021
page 17 / 30
Storing Fuel
Store fuel only in approved safety-type fuel canisters in a dry, cool and safe location protected from light and sun.
Fuel mix ages
–
only
mix sufficient fuel for a few weeks work. Do not store fuel mix for longer than 3 months.
Exposure to light, sun, low or high temperatures can quickly make the fuel mix unusable.
Thoroughly shake the mixture in the canister before fueling your machine.
Pressure may build up in the canister
– open it carefully.
Clean the fuel tank and canister from time to time.
Dispose of remaining fuel and cleaning fluid properly in accordance with local regulations and environmental
requirements.
11.
Fueling
Preparations
•
Before fueling, clean the filler cap and the area around it to ensure that
no dirt falls into the tank
•
Position the machine so that the filler cap is facing up
•
Open the filler cap
•
Fill up with fuel
•
Close the filler cap
Fill up with fuel
Take care to not spill fuel while fueling and do not overfill the tank.
After fueling, tighten down the filler cap as securely as possible.
Changing the fuel pickup body
Change the fuel pick up body every year.
•
Drain the fuel tank
•
Use a hook to pull the fuel pickup body out of the tank and take it off the
hose
•
Push the new pickup body into the hose
•
Place the pickup body in the tank
Содержание EZ.300
Страница 1: ...PULL LINE BLOWER OPERATING INSTRUCTIONS...