Zeitler EZ.300, Руководство по эксплуатации, Страница: 23 / 30

Blowing pull line into cable conduits (ø 25-200 mm)
Operating Manual EZ300 Version 05/2021 page 23 / 30
16. Engine Running Behaviour
If engine running behavior is unsatisfactory even though the air filter is clean and the carburetor is properly
adjusted, the cause may be the muffler.
•
Have the muffler checked for contamination (carbonization)
ZEITLER AG recommends that you have servicing and repair work carried out exclusively by an authorized
servicing dealer.
17. Rewind Starter
To help prolong the wear life of the starter rope, observe the following points:
•
Pull the starter rope only in the direction specified
•
Do not Pull the rope over the edge of the guide bushing
•
Do not pull out the rope more than specified
•
Do not allow the starter grip to snap back, guide it back into the housing slowly
– see ‘Starting / Stopping
Engine’
Have a damaged starter rope replaced by your dealer before it breaks completely.
18. Transport, Storage, Shipping
ALWAYS SHUT OFF THE ENGINE !!
Transporting
in a vehicle :
•
Allow the tool to cool down before placing it in the original plastic case.
•
Properly secure the plastic case to prevent turnover, fuel spillage and damage.
Storing for periods of 3 months or longer
•
drain and clean the fuel tank in a well ventilated area
•
dispose of fuel properly in accordance with local environmental requirements
•
run the engine until the carburetor is dry
– this helps prevent the carburetor diaphragms sticking together
•
thoroughly clean the machine
– pay special attention to the cylinder fins and air filter
•
store the machine in a dry, high or locked location, out of the reach of children and all unauthorized persons
Shipping of the unit
•
drain and clean the fuel tank in a well ventilated area
•
dispose of fuel properly in accordance with local environmental requirements
•
run the engine until the carburetor is dry
– this helps prevent the carburetor diaphragms sticking together
•
thoroughly clean the machine
– pay special attention to the cylinder fins and air filter
•
place the unit in its original carrying case
•
close case correctly and secure closures for ex. with cable ties or string