Carl ZEISS
CARE AND MAINTENANCE
WSB ZPiezo CAN
Changing the power supply unit
14
432339-9010-000
07/2015
E
ng
lish
4.2 Changing the power supply unit
Only the table-top power supply unit specified by the manufacturer may be used.
Before opening the device, always withdraw the mains plug from the mains socket.
Withdraw the mains plug for the table-top power supply unit from the mains socket.
Withdraw the R7B power supply unit plug (Fig. 3/
10
) from the DC voltage socket (Fig. 3/
1
).
To do this, pull the lock release in the direction of the arrows to release the R7B power
supply unit plug (Fig. 5).
Fig. 5
Power supply cable for the table-top power supply unit
Connect the table-top power supply unit to the R7B power supply unit plug (Fig. 3/
10
) at the
DC voltage socket (Fig. 3/
1
) on the controller.
Plug the mains cable into the power supply socket of the power supply unit (Fig. 3/
9
).
Insert the mains plug of the table-top power supply unit into the mains supply socket.
