Standard 25
ICS
B 40-029 e 01/98
3-3
3 OPERATION
3.1
Switch on the instrument
Switch on the instrument via the on/off switch
(3-1/
3
) on the instrument rear. The green LED
(3-1/
2
) must light up.
Set the required brightness via the "Brightness"
control (3-1/
1
).
Depending on the application, place one or several
of the following dia. 32 filters (3-2/
1
) on the dust-
protection glass of the luminous-field diaphragm:
interference wide-band filter, green, 32x4, for
contrast enhancement in b/w photography of
stained sections and for phase contrast;
CB 3 conversion filter, 32x2, to generate the
correct color temperature of 3200 K when
artificial light color reversal film is used.
CB 3, 32x2, and CB 12, 32x2, conversion filters
for use with daylight color film
The Standard 25
ICS
is supplied with factory-aligned illumination. The illumination need not be
adjusted even when the lamp is exchanged by the customers themselves.
Fig. 3-1
Switch on the instrument
Fig. 3-2
Insertion of filters
Содержание Standard 25 ICS
