Zeiss OPMI VISU 210, Инструкция по эксплуатации

Страница: 77 / 252

G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
Description
77
Description of the modules
The floor stand comprises an articulated arm, a stand column and a stand
base. The articulated arm comprises a carrier arm and a suspension arm.
The carrier arm contains the control unit with all electrical supply systems
required for the control of a motorized surgical microscope. You can con-
trol the motorized functions via a foot control panel or a hand control
panel.
The suspension arm permits almost effortless positioning of the surgical
microscope. The spring force of the suspension arm can be varied in a
range from 8 to 20 kg, permitting reliable balancing of the microscope
even with heavy accessory equipment. The downward movement of the
suspension arm can be limited as required.
A maneuvering handle is provided on the stand column. This handle is
used to move the stand and to attach the foot control panel. The stand
column is provided on its left and right with cable supports for winding up
cables before the unit is relocated. Four steerable casters on the stand
base permit easy positioning near the operating table. The stand base
has been designed in such a way that high stability is ensured even with
unfavorable loading of the stand. A locking pedal is provided to lock the
floor standquickly and reliably into position.
Note:
As the stand is very easy to maneuver, there is a tendency to underesti-
mate its considerable weight. Therefore, move the stand slowly and care-
fully!
MISU241