Zeiss OPMI VISU 160, Инструкция по эксплуатации

Страница: 92 / 234

92
Description
G-30-1529-en OPMI® VISU 160 on S8, S81 & S88 Suspension Systems Issue 5.0
Printed on 09. 10. 2006
S88 floor stand
Intended use
The floor stand is a suspension system for Zeiss surgical microscopes
suitable for almost all surgical disciplines. It is used to power and control
the motorized functions of the surgical microscope. The hallmarks of the
floor stand are its superb mobility and easy operation. Four steerable
casters on the stand base permit easy positioning in the OR. The motor-
ized functions of the surgical microscope can be controlled using a foot
control panel or a hand control panel.
Further useful functions include, for example:
– magnetic brakes for almost effortless positioning,
– fully automatic change of the halogen lamp,
– brightness control via a foot control panel,
– reset of X-Y coupling, focus and zoom,
– user-defined basic settings for a maximum of nine users:
– speeds for focus, zoom and X-Y coupling
– and configurable keys on the foot control panel for focus memory,
XY inversion, camera release, swing in/out of SDI, triggering an
AUX signal.
Warning!
When using the Superlux Eye illumination system, only operate the
system with special xenon lamps approved by Carl Zeiss for ophthalmic
surgery. If any other than Carl Zeiss-approved xenon lamps are used,
there is the risk of severe injury to the patient's eye.