Zeiss OPMI VISU 160, Инструкция по эксплуатации

Страница: 80 / 234

80
Description
G-30-1529-en OPMI® VISU 160 on S8, S81 & S88 Suspension Systems Issue 5.0
Printed on 09. 10. 2006
6 Brightness control
You can adjust the brightness using the two control keys on the control
panel.
Note:
The brightness of the xenon lamp can also be adjusted by pressing
the appropriate buttons on the foot control panel.
7 Yellow indicator lamp
Lights when the lamp has failed, or if the lamp module is defective.
After activation and ignition of the backup lamp, the yellow indicator
lamp goes out again.
Note:
If the first lamp has failed and the backup lamp is in use, make sure to
have a backup lamp module ready at hand as a precaution.
8 Green indicator lamp
Lights when the illumination has been switched on.
9 Selector:
Note:
You can adjust the selector in such a way that you can switch the illu-
mination on/off on the right-hand and left-hand sides of the foot control
panel.
Illumination is off.
Illumination is on.
Illumination can be switched on/off on the left-hand side of
the foot control panel.
Illumination can be switched on/off on the right-hand side of
the foot control panel.