Zeiss JENA PLAN HD 9x12, Руководство по эксплуатации

Страница: 69 / 76

B-0705-1 01/1992 (Digitized 07/2005) 3-2
Keep JENA PLAN in bright, dry and well ventilated rooms, humidity <65%;
particularly prone modules and accessories, such as lenses and eyepieces, in dry
restrict store.
For prolonged storage in closed containers fungal infection can be largely avoided
be if absorbent and contaminated with fungicides substances are placed in the container.
ATTENTION
opto-mechanical devices are under the following conditions by always
Mold infestation at risk:
relative humidity> 75%
over 3 days at a temperature b15 to +35 ° C,
Installation in dark rooms with no air movement and
in dust and fingerprints on optical surfaces.
3.2.2 Setting the Tubusbremse
The binocular includes a brake that ensures that the adjusted eye relief not
changes by itself.
This brake can follow after-
be asked:
Eyepiece tubes (3-1/2) on the smallest eye-
provide distance, be two group
visible groups of three screws.
WARNING
The big screws (3-1/1)
must not be obstructed.
By uniformly varying the small
Screw the smooth running of the brake ver-
make:
- Tighten: the transition difficult
- Solve: Transition easier.
Figure 3-1 Setting the Tubusbremse
Page 71
3.2.3 Troubleshooting
Fault indication Possible Cause Measure
Auto exposure is from
at least one of the following
Reasons disturbed:
Switch Switch
"" Indicator in
Control panel BA
lights red