Zeiss JENA PLAN HD 9x12, Руководство по эксплуатации

Страница: 40 / 76

B-0705-1 01/1992 (Digitized 07/2005) 2-7
• Unpacking specified in Section 2.1.1.
• Install the unit in accordance with section 2.1.2 and prepare it for operation.
• Connect the unit according to section 2.1.3.
• Before commissioning or as required following adjustments must
are carried out:
-
Centering lamp 12 V/100 wound
-
Centering the cross table 50 x 30 mm.
Refer to section 2.2.2.
2.2.2 Adjustments
2.2.2.1 centering the lamp 12 V / 100 W
The lamp 12 V / 100 W is factory centered. The fine centering for each used
Halogen light bulb is with a throw adjustment aid (2-12/4) to carry out that instead of a
The lens is inserted into the beam path. Be on the lens then the adjustment aid
the lamp filament, the mirror image and the aperture of the microscope shown.
• table insert orifice Ø 132 mm (2-12/3) or
Diaphragm carrier 1 (2-12/2) with table insert-
aperture Ø 56 mm (2-12/1) out.
• Adjusting (2-12/4) in the nosepiece
Screw.
• Microscope on the rear panel switch.
Figure 2-12 Inserting the adjustment aid
Page 41
• Open the field diaphragm (2-13/7).
• filter turret (2-13/2) for free passage
switch.
• The lens of Justierhiffe (2-13/1)
are mirror images of the lamp filament
as well as the image of the half-closed aperture