manualshive.com logo in svg

Zeiss JENA PLAN HD 9x12, Руководство по эксплуатации, Страница: 10 / 76

Поделиться
Скачать
Zeiss JENA PLAN HD 9x12 Скачать руководство пользователя страница 10

B-0705-1 01/1992 (Digitized 07/2005)

VII

PRODUCT LIABILITY

The incident-light microscope camera JENA PLAN including original accessories or additional equipment may

only be used for the microscopy method described in this manual.

For any other use, possibly also of individual modules or components may from

Manufacturers will not accept any liability. This also applies to all service or

Repairs that are not performed by authorized service personnel. Also

invalidates all Garantie-/Gewährleistungsansprüche also for the parts that are not directly

were affected by the repair.

The following warnings are of particular importance:

The microscope JENA PLAN was in accordance with IEC Publication 348-78,

Safety requirements for electronic measuring instruments, designed and tested and is in a

safe state has been delivered.

This manual contains information and warnings that the

Operator must be followed.

JENA PLAN is a latest scientific and technical knowledge

designed optical microscope for visual, micro photographic or video

Investigation of microscopic objects. The appliance is only for the intended

Use purpose. The device is not for unattended operation

determined!

The microscope has no particular protection against samples with

corrosive, toxic, radioactive or other adverse health effects.

The allowable sample weight (<5 kg) must not be exceeded.

It is to verify that the mains voltage at the back of the con-

corresponds to the value passed.

JENA PLAN is a device of protection class 1

The mains plug shall only be inserted in a socket outlet provided with a protective

Ground contact is provided. This protective measure is not a by using

Extension cord be rendered ineffective without a protective conductor. If the

The mains voltage by means of an auto-transformer, must not by this protective conductor

are interrupted. Any interruption of the protective conductor inside or outside the

Device or the removal of the protective earthing terminal brings danger to the

Device users and is therefore prohibited.

If the microscope is connected to the network, devices internal

Lead terminals dangerous voltages and the opening of covers or

the removal of parts (if it is not functional reasons) can possibly

expose hazardous live parts. The device is therefore disconnected from the mains,

before it is opened for adjustment, replacement, maintenance or repair.

If an adjustment, maintenance and repair of the under-voltage device

inevitably, this activity the which is to be performed by a qualified person in order

is aware of the hazard involved.

Existing openings should not be affected by covering their effect

be.

Page 10

This also applies to vent slots on the bottom. Ventilation slots and

an other openings must be no tools, objects and liquids in the

Device access.

Содержание JENA PLAN HD 9x12













































































Отзывы:

Нет отзывов