Axiotech and Axiotech
vario
Carl Zeiss
B 40-020 e 06/99
2-25
c)
Change of 12 V 100 W halogen lamp
•
Switch off the lamp supply via the On/Off
switch of the microscope (see section 2.11).
•
Disconnect the line cable from the line.
•
Allow the hot 12 V 100 W halogen illuminator
to cool down for approx. 15 mins. after use.
•
Loosen hexagonal screw (2-31/
1
) and pull off
lamp housing (2-31/
2
) in upward direction.
•
Press the two spring levers (2-31/
5
) and
carefully remove defective 12 V 100 W halogen
lamp (2-31/
4
).
•
Remove new 12 V 100 W halogen lamp from
the packaging by holding it on the protection
sleeve (2-31/
3
). Press both spring levers (2-31/
5
)
downwards and carefully insert pins of the new
halogen lamp into the lamp base. Release
spring levers and remove protection cap.
☞
Always use the protection sleeve (2-31/
3
) to hold the bulb of the 12 V 100 W halogen lamp
and never touch the bulb with your bare hands. If required, clean the bulb with pure alcohol
before switching it on for the first time to prevent dirt from burning in.
•
Shortly press spring lever downwards again to center the lamp.
•
Attach lamp housing (2-31/
2
) again and secure it in position with SW 3 hexagonal screw (2-31/
1
).
•
If required, realign 12 V 100 W halogen lamp as described in section 2.12.2 b).
Fig. 2-31
Change of 12 V 100 W halogen
lamp
Содержание Axiotech
