Carl Zeiss
Axiotech and Axiotech
vario
2-22
B 40-020 e 06/99
2.12
Reflected-light illumination equipment
2.12.1
Change of 6 V 30 W halogen lamp
(Axiotech 30)
•
Switch off the On/Off switch (2-28/
8
) on the
microscope stand and disconnect the
instrument cable (2-28/
7
) from the line.
•
Allow hot halogen illuminator to cool down for
approx. 15 minutes after use.
•
Unscrew hexagonal screws (2-28/
6
) using
SW 3 ball-headed screwdriver and remove lamp
cover (2-28/
5
).
•
Press holding components (2-28/
4
) of lamp
insert (2-28/
3
) together and pull out lamp
insert.
•
Remove new 6 V 30 W halogen lamp (2-28/
1
)
from the packaging and push it on the guiding
rails. Make sure that the lamp carrier plate
exactly fits the mounting and fixation pins.
•
Attach lamp insert again by pressing the
holding components slightly together.
•
Attach and screw on lamp cover using the
SW 3 ball-headed screwdriver.
•
Connect instrument to the line and switch on
the On/Off switch on the stand.
☞
Use a protective sleeve (2-31/
3
) to hold the bulb of the 6 V 30 W halogen lamp; if required,
clean the lamp bulb before its initial use with pure alcohol to prevent dirt from burning in.
4
1
Fig. 2-28
Change of 6 V 30 W halogen lamp
Содержание Axiotech
