Zeiss Axiocam 202 mono, Руководство пользователя

Страница: 43 / 52

8 Acquiring images and videos | 8.1 Introduction ZEISS
8 Acquiring images and videos
Due to the fact that image acquisition is already covered in the ZEISS software manuals, image ac-
quisition in ZEISS software is not a part of this guide. For more information on image acquisition
with these software products, please refer to the corresponding software manuals and online
help.
Info
These cameras should only be used for training and research. The images / videos from these
cameras must not be used for the direct generation of diagnostic results.
8.1 Introduction
The Axiocam 208 color and the Axiocam 202 mono are high definition cameras for color and
monochromatic imaging, respectively. They are suitable for use as accessories for educational and
routine microscopy in laboratory environments and for use by trained laboratory personnel. The
cameras have been designed to be used in the field of light microscopy for general observation,
routine work, and simple applications in which a sufficient amount of light is available.
Due to the fact that image acquisition is already covered in the ZEISS software manuals, image ac-
quisition in ZEISS software is not a part of this guide. For more information on image acquisition
with these software products, please refer to the corresponding software manuals and online
help.
Info
These cameras should only be used for training and research. The images / videos from these
cameras must not be used for the direct generation of diagnostic results.
8.2 Basic procedure using operator panel
Prerequisite
ü
An USB flash drive has been inserted into the camera's USB port or into the USB hub con-
nected to the camera.
1. Position your specimen on the microscope and adjust the microscope to see a focused im-
age through the eyepieces.
2. Set the microscope light path to divert the image to the camera (e.g. adjust the micro-
scope's tube slider to 50% camera and 50% eyepieces ).
3. To take a single image, briefly press the Capture button on the camera.
à
The image is saved to the USB flash drive in either JPEG or TIFF format.
4. To start video recording, press the Capture button on the camera for about 5 seconds.
5. To finish video recording briefly press the Capture button on the camera once again.
à
The video is saved to the USB flash drive in MP4 format.
8.3 Basic procedure using OSD menu
Prerequisite
ü
The USB flash drive and mouse/keyboard have been inserted into the USB hub connected to
the camera.
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 43