Installation
8
Printed 10.2013
For the definitions of the LED color signals, please refer to
Notes on
Maintenance
.
Checking the Equipment has been set up correctly
Check the following connections:
The Axiocam 105 color is mounted onto the microscope and is
receiving light.
The Axiocam 105 color is connected to the PC via the USB 3.0 data
cable.
If the LED on the Axiocam 105 color does not turn red now,
please check that you have carried out all of the above steps
correctly.
1.4
Installing the Driver Software
In order to operate the Axiocam 105 color the AxioVision software is
needed.
First connect the Axiocam 105 color to your PC (see the section
"Setting up
the Camera System"
), and then install the driver software.
Installing the Camera Driver using the Setup Program
Notes:
For installation under Microsoft® Windows 7, you need to log on with
administrator privileges. If you do not have access to administrator
rights on your computer, please speak to your system administrator.
In this section, installation is explained using screenshots from
Microsoft Windows 7.
Содержание Axiocam 105 color
Страница 1: ...Axiocam 105 color Installation Reference 10 2013 October 2013 ...
Страница 2: ......
Страница 6: ......
Страница 18: ...Installation 10 Printed 10 2013 ...