Zeiss AT 030, Набор документации на продукцию

Страница: 37 / 88

Instruction for use 6 Cleaning and disinfection
AT 030 6.1 Safety when cleaning and disinfecting the device
319300-9120-000-GA-GB-240320 31 / 60
6 Cleaning and disinfection
6.1 Safety when cleaning and disinfecting the
device
NOTE! The following instructions are only valid for AT 030.
For cleaning and disinfection of tonometer measuring prisms
please refer to the instructions for use and cleaning and
disinfection of tonometer measuring prisms.
NOTE
Damage during assembly, cleaning and transport
The device can be damaged during assembly, cleaning and
transport if the measuring arm with the measuring prism holder is
not at a defined position.
u
When assembling, cleaning or transporting the AT 030 appla-
nation tonometer, the measuring element must be set to 2.0.
NOTE
Damage due to improper cleaning and disinfection
Some cleaning agents and disinfectants may have an adverse effect
on plastic components. Damage caused by such disinfectants is not
covered by our warranty.
u
Observe the national disinfection regulations.
u
Use only disinfectants approved by the manufacturer for the
treatment of plastics and painted surfaces.
u
Do not use aggressive (e.g. acetone) or abrasive cleaning
agents.
6.2 Cleaning
Only clean the outer surfaces of the AT 030. A cloth slightly
moistened (not dripping) with diluted detergent is recommended
for cleaning the casing.