Zehnder Rittling ComfoSpot 50, Инструкции по эксплуатации и монтажу

Страница: 19 / 42

EN 19
3. Install the connections orderly and space saving so that the mounting of the plastic cover for the electric connections
can be done without difficulty.
4. Mount the plastic box for covering the electrical connection and fix it in place on the right-hand side using the yellow
PVC nut and on the left-hand side using the designated screw for fixing the unit on the wall.
3.2.4.2 Relocating the internal control panel
The control panel can be positioned for optimum accessibility either at the top or bottom of the interior cover of the unit,
depending on the ventilation unit's wall mounting height.
Relocating this can be done as follows if the interior top cover is removed:
1. Take the ribbon cable out of the cable retainer in the connection area of the control panel
.
2. Cautiously pull the control panel using the two interlocking fixings (at the side) off the control panel carrier, and
guide the control panel, together with the still connected ribbon cable, out of the control panel carrier for better
handling.
Wires for unit connecting cable
Wires for mains supply line