24 - EN
6. Maintenance
The CC Ease does not require
maintenance. However, the ComfoAir
controlled by the CC Ease does require
periodic maintenance. The maintenance
required by the ComfoAir is stipulated in
the ComfoAir’s manual.
7. Malfunctions
If the ComfoAir has a malfunction, then in
most cases a malfunction alert will appear
in the CC Ease screen. Malfunction alerts
appear on the CC Ease as:
■
A flashing “A” with a number extension
in the field that normally displays the
ventilation setting;
■
A flashing “E” with a number extension
in the field that normally displays the
ventilation setting;
■
A flashing “E A” with a number
extension in the field that normally
displays the ventilation setting;.
■
A flashing “Filter I” or “Filter E” below
the field displaying the ventilation
modes.
All these malfunction alerts on the
CC Ease can be reset by following the
steps below:
Press
until the malfunction alert
disappears (min. 3 sec.).
Filter malfunction
The filters must be cleaned or replaced if
one of the filter warnings below appears
on the CCEase:
■
“ FILTER I ”
The internal filters must
be cleaned or replaced;
■
“ FILTER E ”
The external filters must
be cleaned or replaced (optional).
The internal filters are included in the
standard configuration of the ComfoAir.
The external filters (optional) form part of
the ducting of the ComfoAir, yet do not
form part of the ComfoAir itself.
To replace (or clean) any filters,
please refer to the ComfoAir’s
manual.
