Zehnder Rittling ComfoAir Q, Руководство пользователя

Страница: 15 / 36

14 - EN EN - 15
3.5 Setting the comfort options
Breathing, cooking, showering and using the toilet:
all indoor activities that cause moisture production
and polluted air. Continuous ventilation is necessary
to refresh the air - and keep the air healthy and
comfortable. Failure to do this can result in problems
with fungi, bacteria, dust mites, moisture spots and
unwanted odors. But the problems don‘t stop here.
What about health problems like allergies, respiratory
distress and headache? These are all issues which
influence your health, concentration, functioning and
performance.
In addition to minimizing CO2 and moisture problems
the unit can also minimise heat problems with
its bypass control and with optionally connected
ancillaries.
The unit can be set to AUTO mode to achieve the
most optimal indoor climate for you as possible, via
ventilation and the present optionally connected
ancillaries. The factory defaults of the unit are set
to provide a comfort level desired by the average
person.
3.5.1 Temperature profile
The amount of heat recovery is controlled
automatically based on the set temperature
profile. The effect of the set temperature
profile on the indoor climate is mainly
noticeable in the shoulder seasons (autumn and
spring) and limited by external conditions. It will be
more pronounced and less season-dependent in case
the installation is equipped with one or more of the
options that follow:
■
active cooling (e.g. ComfoCool Q);
■
heating devices;
■
a regulated subsoil heat exchanger (e.g.
ComfoFond-L Q).
1. Navigate to TASK MENU as instructed in the
chapter „How to navigate through the unit menu“.
2. Navigate to TEMPERATURE PROFILE.
3. Navigate to the desired temperature profile.
- WARM: set if you prefer generally higher room
temperature;
- NORMAL: set if you prefer average room
temperature; (default)
- COOL: set if you prefer generally lower room
temperature.
CONFIRM BACK
RESET ERROR
TASK MENU
STATUS
FILTERS
BASIC MENU
CONFIRM BACK
AWAY
TEMPERATURE PROFILE
SCHEDULER
BYPASS
TASK MENU
2 1
CONFIRM BACK
TEMPERATURE PROFILE
WARM
NORMAL
COOL
3