18 - EN
4 Certification and warranty
Warranty conditions
The unit is covered by a manufacturer’s warranty for
a period of 24 months after fitting up to a maximum
of 30 months after the date of manufacture. Warranty
claims may only be submitted for material faults
and/ or construction faults arising during the
warranty period. In the case of a warranty claim,
the unit must not be dismantled without written
permission from the manufacturer. Spare parts are
only covered by the warranty if they were supplied
by the manufacturer and have been installed by an
approved installer.
The warranty becomes invalid if:
�
The guarantee period has elapsed;
�
The unit is used without filters;
�
Parts are used that have not been supplied by the
manufacturer;
�
Non-authorised changes or modifications have
been made to the unit;
�
Installation has not been carried out according to
the applicable regulations;
�
The defects are due to incorrect connection,
inexpert use, or contamination of the system.
On-site (dis)assembly costs are not covered by the
terms of the warranty. This also applies to normal
wear and tear. Zehnder retains the right to change
the construction and/or configuration of its products
at any time without being obliged to alter previously
delivered products.
Liability
The unit has been designed and manufactured for
use in balanced ventilation systems incorporating
Zehnder heat recovery systems. Any other
application is seen as inappropriate use and can
result in damage to the unit or personal injury, for
which the manufacturer cannot be held liable. The
manufacturer is not liable for any damage originating
from:
�
Non-compliance with the safety, operating and
maintenance instructions in this document;
�
The use of components not supplied or
recommended by the manufacturer.
Responsibility for the use of such components lies
entirely with the installer;
�
Normal wear and tear.
Disposal
Dispose of the unit in an environmentally friendly
manner. Do not dispose of the unit with your
domestic waste.
1. Contact the supplier about the possibilities to
return the unit.
2. If the unit cannot be returned, check the local
regulations for the options on recycling the
components.
3. Do not dispose of the batteries from the wireless
(RF) operating devices as normal waste. They
must be discarded at designated disposal
locations.
CE certification
Zehnder Group Nederland B.V.
Lingenstraat 2 • 8 028 PM Zwolle-NL
T +31 (0)38 4296911 • F + 31 (0)38 4225694
Company register Zwolle 05022293
EEC declaration of conformity
Machine description
Heat recovery units:
ComfoAir Q series
Complies with the following directives
Machinery Directive
(2006/42/EEC)
Low Voltage Directive
(2006/95/EEC)
EMC Directive
(2004/108/EEC)
Zwolle, 04-04-2016
Zehnder Group Nederland B.V.
A.C. Veldhuijzen,
Head of R&D
Competence Center ComfoSystems
Содержание ComfoAir Q 350 ST
