Zehnder Rittling ComfoAir 550 Luxe, Руководство по установке

Страница: 20 / 44

EN - 16
Menu P7
¨
Reading malfunctions (and system information)
(Malfunction) information values
submenu description Minimum Maximum General
reset
P70 Current software version. Version number of the software (without “v”)
P71 Most recent malfunction. Code in accordance with alarm and malfunction
alert
P72 Malfunction before the most recent one Code in accordance with alarm and malfunction
alert
P73 Malfunction before the most recent two Code in accordance with alarm and malfunction
alert
P74 Resseting malfunction(s)
• Set value tot '1' and press “ ” on
the CC-Ease panel.
0 1
(= activate)
0
P75 General reset.
•
Press
“ ” on the CC-Ease panel
for at least 5 seconds to carry out a
general reset.
All original software settings are re-
stored following a general reset.
0 1
(= activate)
0
Note:
After a general reset, the ComfoAir will ask you to reset the “nL / HL” (see P56) and “Li
/ Re” (see P57) settings.
Following a general reset, all settings and programmes need to be checked and set to
the right value.
P76 Self-testing the ComfoAir 0 1
(= activate)
0
• The ComfoAir will run at maximum Rotation Per Minute (RPM).
• The bypass valve will open and close.
• The preheater valve will open and close after the bypass has closed (If a preheater element
is fitted).
P77 Resetting filter dirty counter 0 1
(= activate)
0
Note:
This resets the counter that triggers a dirty filter alert on the ComfoAir. This allows the filter to be
cleaned or replaced before the dirty filter alert appears.
Menu P8
¨
Setting the RF input and digital inputs (0-10V)
Analogue input values
submenu description Minimum Maximum General reset
810 Analogue input 1
0= not fitted 1= fitted
0 1 0
811 0= controlling 1= programming (analogue
input 1) 0 1 0
812 set point analogue input 1
(programming) 0 100 50
813 min. setting analogue input 1 0 99 0
814 max. setting analogue input 1 0 100 100
815 0=positive analogue input 1 1=negative
setting analogue input 1 0 1 0
816 read-out analogue input 1 0 100 -
820 Analogue input 2
0= not fitted 1= fitted
0 1 0
821 0= controlling 1= programming (analogue
input 2) 0 1 0