Zehnder Rittling ComfoAir 550 Luxe, Руководство по установке

Страница: 19 / 44

15 - EN
Additional programme values
submenu description Minimum Maximum General
reset
P59 Confirming the presence of an enthalpy exchanger.
• 0; Enthalpy exchanger not fitted
• 1; Enthalpy exchanger with RH sensor.
• 2; Enthalpy exchanger without RH sensor. 0 (= No) 2 (= Yes) 0
Ensure the condensation drain is sealed.
If an enthalpy exchanger without a sensor is selected, then the safety programme will not be
activated and malfunction alerts EA1 & EA2 will never occur.
Menu P6
¨
Setting additional programmes
Additional programme values
submenu description Minimum Maximum General
reset
P60 Confirming the presence of a geothermal heat exchanger.
• 0; Geothermal heat exchanger not fitted
• 1; Geothermal heat exchanger fitted
• 3; Geothermal heat exchanger unregulated. 0 (= No) 3 (= Yes) 0
If a valveless geothermal heat exchanger is fitted, then the unregulated setting must be se -
lected so that the ComfoAir's bypass valve continues to function properly.
P61 Setting the percentage by which the supply fan must in-
crease its speed when the valve of the geothermal heat
exchanger is opened. 0% 99% 0%
P62 Tge (Temperature sensor geothermal heat exchanger),
low 0
o
C 15
o
C 7
o
C
The valve of the geothermal heat exchanger will open if the temperatuur is below the set temperatuur.
The valve of the geothermal heat exchanger will close if the temperatuur is above the set temperatuur.
The valve of the geothermal heat exchanger will only response if the ComfoAir is in Winter-
mode.
P63 Tge (Temperature sensor geothermal heat exchanger),
high 10
o
C 25
o
C 23
o
C
The valve of the geothermal heat exchanger will open if the temperatuur is above the set temperatuur.
The valve of the geothermal heat exchanger will close if the temperatuur is below the set temperatuur.
The valve of the geothermal heat exchanger will only response if the ComfoAir is in Summermode.
P64 Tah (Temperature sensor afterheater), desired 5
o
C 40
o
C 18
o
C
The afterheater will switch off when the desired temperature is reached