ZEGGO THA_C1Z1
REV. 1 03/19
4
Product Description
Figure 1: THA_C1Z1 Description
Product Introduction
THA_C1Z1 Temperature Transmitter functions as a remote transmitting device. A gateway with internet
access must within the range that the sensor reading can successful transmit over to the gateway. The
radio range between transmitter and gateway varies significantly based on the site environment and
surrounding objects (metal walls, furniture etc.). The compatible model of Zeggo’s gateway for T
HA_C1Z1
is:
•
Zeggo Gateway, GWA_12Z1
Startup Operation
Temperature transmitter equipped with full battery at the time of delivery. It is always a good practice to
check that the device is ALIVE prior to the installation by turn ON/ OFF the device. By pressing and holding
the button for an interval, blinking and colour of status LED will indicate current ON/OFF status.
Table 1: Turn On And Off Operation
Button Press and Hold Period
Status LED Behaviour
ON/OFF Status
> 3 second
Flashing of Green LED
Turn ON
> 5 second
Light up Red LED
Turn OFF/ Go into Sleep
A signal will send out to the gateway immediately after turned on accompany with blinking of LED
indicating the operation status.
Green LED indicated the data reading is successfully sent and received
by gateway
. On the other hand, flash of
Red LED shows a transmission failure or sensor fault
.
Configuration Button (ON/OFF)
Sensor Probe(Metal type)
Status LED (Green/ Red Bicolour)
Flange
