5
6.
ADVANCE
With this setting is possible to advance, or retard whole ignition map on both ignition coil
outputs. When setting is positive, then ignition map is advanced and when setting is negative,
than ignition map is retarded. Ignition map is unchanged, with setting
0.0deg
.
Move to
Advance
, with pressing + , or - and then press enter .
Now you can set advance with pressing + , or - (in 0.1deg steps) and then press enter .
7.
REV. WITHOUT IGN
Number of revolutions without spark...apply only at starting.
Move to,
Rev Without Ign
with pressing + , or - and then press enter .
Now you can set number with pressing + , or - and then press enter .
8.
MIN START RPM
Minimum RPM for starting.
Move to,
Min Start Rpm
with pressing + , or - and then press enter .
Now you can set rpm with pressing + , or - and then press enter .
9.
GEAR SHIFT LIGHT
Move to
Gear Shift Light
with pressing + or - and then press enter .
Now you can change rev point with pressing + or - (in 100 rpm steps) and then press enter .
10.
QUICK SHIFT
Move to
Quick Shift
with pressing + , or - and then press enter .
...you entered submenu for quick shift settings.
Submenu organisation:
Shift Kill Time
- basic kill time
Smart Shift
- activating/deactivating automatic kill time for different revs
Exit
- exit submenu
10.1. SHIFT KILL TIME
Enter
Quich Shift
menu and move to
Shift Kill Time
with pressing + , or - and then press
enter.
Now you can change kill time with pressing + , or - (in 10 ms steps) and then press enter .
