6. Call Settings
30
Note:
The principle of routing we used here is Perfect Matching, which is searching the
most matched route based on source line. For example, there are two routes, the Sources of
route A are IP1 and IP2, the Source of route B is IP1, so when a call is from IP1, no matter which
route is on the first positon, the system will choose route B.
•
Destination:
the type of the destination device and ports available.
•
Caller Pattern:
caller number need to be matched for this call. the default is 'ALL'.
•
Callee Pattern:
callee number need to be matched for this call. the default is 'ALL'.
•
Schedule:
the valid time segment, the default is 'NULL' means no time segment limitation.
Choose one route and click
[Move Down]
or
[Move Up]
buttons to reorder the sequence. click
[Modify]
or
[Remove]
button to edit or delete routes.
6.3.2
Parameters Descriptions
Enter necessary parameters in edit area when you create a new route, press
[Add]
and save it.
Note:
You can not call if there are no routes.
•
Description:
the decription of this route.
•
Source Line:
the type of source device (includes FXO, GSM, CDMA , IP ) and ports available(
multi-chosen ). For example, 'Slot1-2' means the 2nd port of the 1st card. "G/C"means GSM
or CDMA module: C-slot3 is the CDMA port of the third interface card, "G-slot4"is the GSM
port of the forth interface card.
•
Caller Pattern:
the number pattern of caller (see 6.1 number mathing rules ), the default is all
patterns are valid.
•
Callee Pattern:
the number pattern of callee (see 6.1 number mathing rules ), the default is
all patterns are valid.
•
Schedule:
the valid time segment of this route. Default 'NULL' means no time limitation. The
schedule is set in Schedule menu ( see 6.5 Schedule Group )
•
Destination Line:
the type of destination device (includes FXO, CDMA , GSM, IP ) and ports
available(multi-chosen ), default 'ALL' means all ports of this card can be used.
6.4
Alter
Alter
is the translation of call numbers based on defferent strategies. For example, strip ahead
or behind, add ahead or behind, part-replace or all-replace. There are created alter rules based
on created time in the list. In process, the system will match this rule list with current call
information until find the perfect one.
The list area and the edit area of this page:
•
The list area: show established list of number transform.