4. Monitor
17
•
Type :
the line type, includes: IP (Register IP or unregister IP ), FXO , GSM/CDMA or GTXT.
Note:
GTXT only shows registered GTXT (unregistered GTXT will not be shown). red font
means unavailable line.
•
ID:
the sequence number of the line ( for example: "slot1-2" means the 1st card's 2
nd
port).
•
Phone Number:
the phone number assigned to this line.
•
Status:
the status of the line
-
For IP Line:
includes Avaialbe, Invalid, Full, Register fails, Registering.
-
For GSM/CDMA line:
includes Available, Invalid, On used, Register fails, Registering,
Signal low, No SIM Card
-
For FXO line:
includes Available, Invalid, On used.
Note:
GS8 monitors SIM cards of wireless modules (including GSM and CDMA), and all
status will be shown at the Status field. For IP Line, GS8 checks whether unregister IP lines are
ready every 10 minutes and shows the result at
Status
field.
•
Signal Strength(0~31):
the realtime signal checking of GSM/CDMA line, current scale is from
0 to 31. for example,
means the signal magnitude is 16 and be checked every one
minute.
Figure 4-2
Monitor - Line Status page