Zebex Z-3152 Series, Руководство по программированию

Страница: 111 / 181

108
Codabar (NW - 7)
Enable/Disable Codabar
To enable or disable Codabar, scan the appropriate bar code below.
Enable Codabar
Disable Codabar
Set Lengths for Codabar
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. Set lengths for Codabar
to any length, one or two discrete lengths, or lengths within a specific range.

One Discrete Length - Select this option to decode only Codabar
symbols containing a selected length. Select the length using the
numeric bar codes in
Appendix D, Numeric Bar Codes . For
example, to decode only Codabar symbols with 14 characters,
scan Codabar - One Discrete Length, then scan 1 followed by 4. To
correct an error or to change the selection, scan Cancel barcode.

Two Discrete Lengths - Select this option to decode only Codabar
symbols containing either of two selected lengths. Select lengths
using the numeric bar codes in
Appendix D, Numeric Bar Codes .
For example, to decode only Codabar symbols containing either 2
or 14 characters, select Codabar - Two Discrete Lengths, then
scan 0, 2, 1, and then 4. To correct an error or to change the
selection, scan Cancel barcode.

Length Within Range - Select this option to decode a Codabar
symbol with a specific length range. Select lengths using numeric