Zebex Z-3152 Series, Руководство по программированию

Страница: 11 / 181

8
Decode Session Timeout
This parameter sets the maximum time decode processing continues during a
scan attempt. It is programmable in 0.1 second increments from 0.5 to 9.9
seconds. The default timeout is 9.9 seconds.
To set a Decode Session Timeout, scan the bar code below. Next, scan two
numeric bar codes from
Appendix D, Numeric Barcodes that correspond to the
desired on time. Single digit numbers must have a leading zero. For example,
to set a Decode Session Timeout of 0.5 seconds, scan the bar code below, and
then scan the 0 and 5 bar codes. To correct an error or change the selection,
scan
Cancel barcode .
Decode Session Timeout
Timeout Between Decodes, Same Symbol
This option is used in presentation mode to prevent multiple reads of a symbol
left in the Device’s field of view. The timeout begins when the symbol is
removed from the field of view. It is programmable in 0.1 second increments
from 0.0 to 9.9 seconds. The default interval is 0.6 seconds.
To select the timeout between decodes for the same symbol, scan the bar
code below, then scan two numeric bar codes from
Appendix D, Numeric Bar
Codes that correspond to the desired interval, in 0.1 second increments.
Timeout Between Decodes, Same Symbol