ZDC ZN-7200-2AEI-L, Руководство пользователя

Страница: 94 / 110

94
encryption for the client. If it is selected, the data encryption can only be TKIP + AES and the
passphrase is required.
Data Encryption
If data encryption is enabled, the key is required and only sharing the same key with other
wireless devices can the communication be established.
None : Available only when the authentication type is open system.
64 bits WEP : It is made up of 10 hexadecimal numbers.
128 bits WEP : It is made up of 26 hexadecimal numbers.
152 bits WEP : It is made up of 32 hexadecimal numbers.
TKIP : Temporal Key Integrity Protocol, which is a kind of dynamic encryption, is co-used with
WPA-PSK, etc.
AES : Advanced Encryption Standard, it is usually co-used with WPA2-PSK, WPA, WPA2, etc.
TKIP + AES : It allows for backwards compatibility with devices using TKIP.
We strongly recommend you enable wireless security on your network!
Only the same Authentication, Data Encryption and Key among the IEEE 802.11n
ZAC Access Point and wireless clients can the communication be established!
VLAN
If your network uses VLANs, you can assign one SSID to a VLAN, and client devices using the SSID are
grouped in that VLAN.
To allow users on the VLAN to access the WEB page of the IEEE 802.11a/n ZAC Access Point, you need
to enable
“
Enable 802.1Q VLAN
” and assign a management VLAN ID for your device. Make sure
the assigned management VLAN ID is identical to your network VLAN ID to avoid failures of accessing
the Web page of the IEEE 802.11n ZAC Access Point.
Note: