ZDC ZN-7200-2AEI-L, Руководство пользователя

Страница: 90 / 110

90
The maximum output power will vary depending on the country selected in order to
comply with the local regulation.
The output power here is counted from the RF single chain only not including the
antenna gain.
Maximum Output Power (per chain):
Specify the signal transmission power. The higher the output power is, the wider the signal can
cover, but the power consumption will be greater accordingly. The output power will vary
depending on each country
’s regulation.
Data Rate
Usually
“
Auto
” is preferred. Under this rate, the IEEE 802.11n ZAC Access Point will
automatically select the highest available rate to transmit. In some cases, however, like where
there is no great demand for speed, you can have a relatively-low transmit rate for compromise of
a long distance.
Extension Channel Protection Mode
This is to avoid conflict with other wireless network and boost the ability of your device to catch all
802.11g transmissions. However, it may decrease wireless network performance. Compared to
CTS-Self; the transmission amount of CTS-RTS is much lower.
Enable MAC Clone
Available only under wireless client mode, it hides the MAC address of the AP while displays the
one of associated wireless client or the MAC address designated manually.
Site Survey
Under wireless client mode, the IEEE 802.11n ZAC Access Point is able to perform site survey,
through which, information on the available access points will be detected.
Open “
Basic Settings
” in “
Wireless
”, by clicking the “
Site Survey
” button beside “
Wireless
Mode
” option, the wireless site survey window will pop up with a list of available AP in the vicinity.
Select the AP you would like to connect and click
“
Selected
” to establish connection.