ZDC ZN-7200-2AEI-L, Руководство пользователя

Страница: 74 / 110

74
General Settings:
Device Mode : Three modes are provided: AC+Thin AP , Thin AP , FAT AP . Select AC+Thin AP
to have the device act as virtual access controller to manage other managed APs on your network.
Select
“Thin AP” to have the ZAC Access Point managed by the ZAC AP in AC mode. Select
FAT AP to perform as a standalone AP, neither managing nor managed by other ZAC APs.
Device Name : Specify the device name, which is composed of no more than 15 characters w ith
(0-9), (A-Z), (a-z) or (-).
Ethernet Data Rate : Specify the transmission rate of data for Ethernet. Default is Auto .
IP Address Assignment:
Obtain IP Address Automatically : If a DHCP server exists in your network, you can check this
option, thus the IEEE 802.11n ZAC Access Pioint is able to obtain IP settings automatically from
the DHCP server.
Use Fixed IP Address : Check this option. You have to specify a static IP address, subnet mask,
default gateway and DNS server for the ZAC Access Point manually. Make sure the specified IP
address is unique on your network in order to prevent IP conflict.
Enable 802.1Q VLAN
To be able to access the web page of the managed AP in the VLAN network, you need to assign
the VLAN management ID for the managed AP. Note that the ID on the switch must be identical
of the AP
’s VLAN ID. Check
Enable 802.1Q VLAN checkbox to activate it.
Management VLAN ID : Enter the VLAN ID.