ZDC ZN-7200-2AEI-L, Руководство пользователя

Страница: 89 / 110

89
Wireless Network Name (SSID)
This wireless network name is shared among all associated devices in your wireless network.
Keep it identical on all those devices. Note that the SSID is case-sensitive and can not exceed
32 characters.
Broadcast SSID
Under AP mode, hiding network name is necessary when you are in a wireless environment that
may have potential risk. By disabling broadcast SSID, the STA can not scan and find IEEE
802.11n ZAC Access Point, so that malicious attack by some illegal STA could be avoided.
802.11 Mode
The IEEE 802.11n ZAC Access Point can communicate with wireless devices of 802.11b/g or
802.11b/g/n.
HT Protect
Enable HT (High Throughput) protect to ensure HT transmission with MAC mechanism. Under
802.11n mode, wireless client can be divided into HT STA and Non-HT STA, among which the
one with HT protect enabled gets higher throughput.
Frequency/Channel
Channel varies much as the available band differs from country to country. Select a proper
operating channel in the drop-down list according to your situation.
Extension Channel
Only applicable to AP, AP Repeater, and 40MHz channel width) indicates the use of channel
bonding that allows the IEEE 802.11n ZAC Access Point to use two channels at once. Two
options are available: Upper Channel and Lower Channel.
Channel Mode
Four levels are available: 5MHz, 10MHz, 20MHz and 40MHz. The last one can enhance data
throughput, but it takes more bandwidth, thus it might cause potential interference.
Antenna
Antenna allows you specify the gain of the external antenna. The antenna gain calculates the
TX power back off needed to remain in compliance with regulations.
Note: