General Menu
30
Configuring the Wireless Access Point
6.
To use the L2 protocol to discover the thin AP, select Connect with Wireless
Switch via L2 Discovery.
Figure 5-2. Wireless Switch Settings
Advanced Setting
Configuring Fat AP Mode
Before configuring fat AP Basic settings, make sure that AP mode is set to Fat
AP.
1.
If currently in Thin AP Mode: On the main menu on the left, click Advanced
Settings.
2.
Select Fat AP from the drop-down list.
3.
Click Enable on Reboot, then click Apply. The wireless AP reboots and will
be operate in thin AP mode the next time you log in.
Figure 5-3. Setting to Fat AP Mode
You can choose to configure the wireless access point in thin AP or Fat AP
mode.
To select the AP mode:
1.
On the main menu on the left, click Advanced Settings.
2.
Select Thin AP or Fat AP from the drop-down list.
