ZComax AG-622, Руководство по установке

Страница: 4 / 5

λ
Remove the AG-622 module from its protective packaging.
λ
Avoiding Electrostatic Discharge
Before you install the AG-622 module, ground yourself by touching a
piece of metal to avoid electrostatic discharge (ESD). You should also
take the following precautions to prevent damage to the AG-622
module:
λ
Keep the AG-622 module in its antistatic-shielded bag until
you are ready to install it.
λ
Handle the AG-622 module by its edges.
λ
Ensure the connector is connected to above Model’s board tightly.